QQ在线
产品介绍
OVERVIEW
The DXLink Multi-Format Transmitter sends analog and digital audio and video signals including HDMI/HDCP, control, and Ethernet while passing USB signals up to 100 meters over one standard twisted pair cable. The DXLink Transmitter can also be used as a point-to-point solution with a DXLink HDMI Receiver. The DXLink Transmitter is powered from the DXLink input card of the Enova DGX. The transmitter features both a multi-format analog port to support legacy devices and an HDMI port to support newer digital devices.
COMMON APPLICATIONS
The DXLink Multi-Format Transmitter sends analog or digital video, audio and control to a remote display across the room, on the other side of the house or to a classroom down the hall. The transmitter's built-in control ports can be used to control a source and the ICSLan port provides an IP access point.
FEATURES
◆ Only One Cable – Send audio and video while passing control, Ethernet, USB signals and power
◆ Native NetLinx Control Everywhere – Control connected source and display devices using the built-in IR and RS232 ports
◆ Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
◆ Multi-Format Analog Port and HDMI Port – Supports legacy analog signals - RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, DisplayPort and DVI signals
◆ Standard Twisted Pair Cable – Save time and effort in installation by leveraging pre-existing cost effective twisted pair cable
◆ USB Support – Delivers signals from a remote keyboard and mouse to locally connected PC
SPECIFICATIONS
GENERAL
AC Power:
100-240 VAC single phase, 50-60 Hz
0.6 A @ 115 VAC max
DXLink Power:TX unit can alternatively have power supplied over twisted pair cable when connected to a DXLink Power sourcing device such as an Enova DGX Digital Media Switcher
Power Consumption (Max):TBA
Power Consumption (Typ):12 V (±10%), 1.5A (18 W) per unit (Estimate)
BTU/HR (Max):TBA
BTU/HR (Typ):61 (Estimate)
Power Connector:2.1 mm DC Power Jack
Operational Temperature:32° to 104° F (0° to 40° C)
Storage Temperature:-22° to 158° F (-30° to 70° C)
Humidity:0 to 90% non-condensing
Mounting Options:
Compatible with all V Style versatile mounting options including rack, surface or pole
Advanced Configuration Interface:USB Mini-B Connector
Transport Layer Throughput (Max):10.2 Gbps
Compatible AMX Products:
DXLink HDMI RX, Enova DGX 16 and Enova DGX 32 Digital Media Switcher
Twisted Pair Cable Type:Cat5e, Cat6/6e, Cat6a, Cat7, STP, FTP
Twisted Pair Cable Length:Up to 328 ft (100 m)*
Dimensions (HWD):1" x 8 3/4" x 5 1/5" (2.54 x 22.12 cm x 13.08 cm)
Weight:Approx. 1.1 lb (0.50 kg)
Shipping Weight: Approx. 2.20 lb (1.00 kg)
MTBF:TBA
Approvals (Pending):CE, FCC, UL, cUL, RoHS
FRONT CONNECTORS
Advanced Configuration Interface:USB Mini-B Connector
BACK CONNECTORS
Video Input:
HD-15 (RGBHV, RGBs, RGsB, Y/Pb/Pr, Y/c / S-Video, composite – breakout cable is required for non RGBHV formats)
HDMI Input:HDMI Type A Female
Analog Stereo Input:3.5mm Mini-Stereo Jack
S/PDIF Digital Audio Input:RCA Jack
ICSLAN/Ethernet Port:RJ-45 Connector, TCP/IP Port (ICSLAN 10/100)
Serial:
3.5mm Pluggable Phoenix Terminal Block
Bidirectional RS-232
Standard NetLinx Baudrate 1200-115k
Parity support Odd/Even/None
IR RX:
3.5mm Mini-Stereo Jack
Port for IR03 Receiver (Optional)
IR TX:
3.5mm Pluggable Phoenix Terminal Block
Port for CC-NIRC Emitter (Optional)
USB (HID):USB Type B Connector
DXLink Output:RJ-45
Local Power:2.1 mm DC Power Jack
CONTROLS & INDICATORS
ID Pushbutton:Places system in NetLinx Device ID assignment mode
Power Indicator:Green indicates whether or not the module is powered on
Digital Video Indicator:Green LED indicates the presence of video and audio signals through the module
Audio Indicator:Green LED indicates the presence of audio signals through the module
Analog Video Indicator:
3 Green LEDs, 1 lights to indicate the presence of the type of analog video through the Multi-Format TX (composite, Y/c; Y/Pb/Pr or RGB; RGBHV or RGBS)
IR TX Indicator:Red LED lights during the transmission of IR data via the rear IR port
IR RX Indicator:Yellow LED lights during the receipt of IR data via the rear IR port
RS-232 TX Indicator:Red LED shows serial transmit (TX) data activity
RS-232 RX Indicator:Yellow LED shows serial receive (RX) data activity
LINK/ACT:
Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
Status:Green LED lights when the Controller is programmed and communicating properly
CEC Indicator:Yellow LED shows CEC data activity when in point-to-point mode
USB Indicator:Yellow LED shows USB (HID) activity
HDMI
Compatible Formats:HDMI, HDCP, DVI
Input Signal Type:HDMI
Signal Type Support:HDMI
Input Connector:
HDMI Type A Female
DVI-D (Single Link with Cable Adapter)
DisplayPort ++ (Input Only, with HDMI Cable Adapter)
Data Rate (Max):4.95 Gbps / 6.75 Gbps^
Pixel Clock (Max):165 MHz / 225 MHz^
Progressive Resolution Support:
480p up to 1920x1200 @ 60 Hz including but not limited to those resolutions shown on Digital Video Resolution Support Appendix
Interlaced Resolution Support:480i, 576i, 1080i
Audio Format Support:Dolby TrueHD, Dolby Digital^^, DTS-HD Master Audio, DTS^^, L-PCM
Audio Resolution:16 bit to 24 bit
Audio Sample Rate:32 kHz, 44.1 kHz, 48 kHz, 96 kHz^^^, 192kHz^^^
Local Audio Support:Yes for audio insertion
HDCP Support:
Yes, supports AMX HDCP InstaGate Pro Technology
When used with an AMX Matrix Switch the key support is up to 16 devices per output, independent of source device
When used as a single point to point solution the key support is defined by the source device
CEC Support:
Pass-Through in point to point mode, not supported when passing through an Enova DGX Digital Media Switcher
DDC/EDID Support:
EDID in point to point mode is passed up from the sink device when used with an AMX Matrix Switch the EDID is provided by the TX and is user re-programmable
Input Voltage (Nominal):1.0 Vpp Differential
Input Re-clocking (CDR):Yes
Input Equalization:Yes, Adaptive
Propagation Delay (Typ):2 us
Deep Color Support:24-bit, 30-bit^, 36-bit^
Color Space Support:TBA
3D Format Support:
Yes^ (HDMI Primary Formats)
Frame Packing 1080p up to 24Hz
Frame Packing 720p up to 50/60Hz
Frame Packing 1080i up to 50/60Hz
Top-Bottom 1080p up to 24Hz
Top-Bottom 720p up to 50/60Hz
Side-by-Side Full 1080p up to 24Hz
Side-by-Side Full 720p up to 50/60Hz
Side-by-Side Half 1080p up to 50/60Hz
Side-by-Side Half 720p up to 50/60Hz
*Cable quality required in order to meet 100 meter distance should meet ANSI/TIA/EIA 568A-5 or better specification and be rated for 250 MHz or better. For cable runs approaching the 100m limit, Cat6/6e, Cat6a or Cat7 is recommended. It is recommended that the cabling between AMX systems/devices be a uniform run of solid core cabling with no patch cables or extensions. If a patch cable is required (for example, between a patch panel and an AMX device), the patch cable should be limited to 5 m total on each end. Best results have been seen using a Cat6 coupling device for attaching the cables together even when using lower rated Cat5e cabling.
Important Notice: DXLink twisted pair cable runs for DXLink equipment should only be run within a common building.
^ Only supported when the DXLink Rx Scaler is in Bypass mode and format is 1080p60 or less.
^^ Dolby Digital and DTS support up to 48kHz, 5.1 channels.
^^^2 Channel L-PCM support up to 48kHz at all resolutions. 2 Channel L-PCM support up to 192kHz at 1080p (50,59 60Hz). 2 Channel L-PCM support up to 96kHz at 720p (50,59 60Hz), 1080p (24, 25, 30, 50, 59, 60Hz), 1080i (50, 59, 60 fields).
Note-Reminder: Interlace video supported into the Transmitter, progressive only supported out of the Receiver unless in non-scaling bypass mode
ANALOG VIDEO
Compatible Formats:RGBHV, RGBs, RGsB, YPbPr (HDTV), Y/c (S-Video), C (Composite)
Progressive Resolution Support:
480p up to 1920x1200 @ 60 Hz
(reference Analog Table Format Appendix for extended list)
Interlaced Resolution Support^^^^:
480i, 576i, 1080i
(reference Analog Table Format Appendix for extended list)
Auto-Adjust Input:Supported
RGB Input Signal Level Range:750 mVpp
RGB Input Impedance:75 Ohms
HV Sync Input Signal Level Range:0 to + 5 V
HV Sync Input Impedance:TBA
HV Sync Input Trigger Voltage:TBA
Digital Processing:TBA
Y/Pb/Pr Input Signal Level Range:1.0 Vpp for Y, 700 mVpp for Pb Pr
Y/Pb/Pr Input Impedance:75 Ohms
Y/c (S-Video) Input Signal Level Range:1.0 Vpp for Y, 300 mVpp for c
Y/c (S-Video) Input Impedance:75 Ohms
C (Composite) Input Signal Level Range:1.0 Vpp
C (Composite) Input Impedance:75 Ohms
Input Connector:HD-15 (Breakout cable required for non RGBHV formats)
^^^^ Interlace video supported into the Transmitter, progressive only supported out of the Receiver unless in scaler bypass mode.
AUDIO (ANALOG & DIGITAL S/PDIF)
Input Signal Types:
Stereo Analog, S/PDIF
Video signal must be present to pass Audio
Analog Input Level (Max):+3 dBu, unbalanced
Analog Input Impedance:10k Ohms
Analog to Digital Conversion:48 kHz Sample Rate, 24-bit
S/PDIF Resolution:16 to 24 bit
S/PDIF Sample Rate:32 kHz, 44.1 kHz, 48 kHz, 96 kHz^^^^
S/PDIF Input Signal Level Range:200 mVpp to 600mVpp terminated
S/PDIF Input Impedance:75 Ohms
Analog to Digital Reference Level:TBA
Optimal Analog Audio Operating:TBA
Optimal Digital Audio Operating:TBA
Input Connectors:
3.5mm Mini-Stereo Jack (Analog Stereo)
RCA Jack (S/PDIF)
^^^^ 96 kHz audio only available when source video resolution is 800x600 @ 60Hz(40 MHz pixel clock) or greater. Otherwise 48 kHz max
