QQ在线
产品介绍
OVERVIEW
The DXLink HDMI Transmitter sends HDMI with HDCP, control, and Ethernet up to 100 meters over a single standard twisted pair cable. As part of a complete distribution system, use the DXLink Transmitter with the Enova® DGX DXLink Twisted Pair Input Boards or compatible Enova DVX All-In-One Presentation Switchers. The DXLink Transmitter can also be used as a point-to-point solution with the DXLink HDMI Receiver. The DXLink Transmitter can be powered from any DXLink power source such as the Enova DGX DXLink Twisted Pair Input Board or the Enova DVX-3155HD or DVX-2155HD, and it also includes a local power supply.
COMMON APPLICATIONS
The DXLink HDMI Transmitter is ideal for any long distance HDMI run. It is designed to send HDMI and control signals to a remote display across the room, on the other side of the house or to a classroom down the hall. The transmitter has built-in control ports that can be used to control a source and the ICSLan port provides an IP access point.
FEATURES
◆ Only One Cable – Send audio and video while passing control, Ethernet, and power over one twisted pair cable
◆ Send HDMI signals up to 100 meters – Extend the reach of the HDMI signals far beyond the capabilities of typical HDMI cabling
◆ HDMI port – Supports HDMI with HDCP, DisplayPort or DVI signals using the appropriate breakout cable
◆ Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable
◆ HDCP Compliant
SPECIFICATIONS
GENERAL
Dimensions (HWD):1" x 8 3/4" x 5 1/5" (2.54 cm x 22.12 cm x 13.08 cm)
Weight:Approx. 1.1 lb (0.50 kg)
Shipping Weight:Approx. 2.20 lb (1.00 kg)
AC Power:
100-240 VAC single phase, 50-60 Hz
0.6 A @ 115 VAC max
DXLink Power:
TX unit can alternatively have power supplied over twisted pair cable when connected to DXLink Power sourcing device such as an Enova DGX 16/32 Digital Media Switcher DXLink Twisted Pair Input Board or Enova DVX-3155HD or DVX-2155HD All-In-One Presentation Switcher.
When using in conjunction with Enova DGX use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of a configuration and whether any of the DXLink Transmitters or Receivers should be powered with the local power supply. The configuration tool contains instructions on how to determine power requirements
Power Consumption (Max):
Local 12V supplied: 9 W
DXLink power supplied via Enova DGX 16/32 Digital Media Switcher DXLink Twisted Pair Output Board or Enova DVX-3155HD or DVX-2155HD All-In-One Presentation Switcher: 9 W
Power Connector:2.1 mm DC Power Jack
Mounting Options:
Compatible with all V Style versatile mounting options including rack, surface or pole
Advanced Configuration Interface:USB Mini-B Connector
Transport Layer Throughput (Max):10.2 Gbps
Compatible AMX Products:
DXLink HDMI RX
Enova DGX 16 / 32 Digital Media Switchers
Enova DVX-3155HD and DVX-2155HD All-In-One Presentation Switchers
Twisted Pair Cable Type:
Cat5e, Cat6/6e, Cat6a, Cat7 of UTP, SF/UTP, S/FTP, and F/UTP varieties*
Twisted Pair Cable Length:Up to 328 ft (100 m)*
MTBF:TBA
Approvals:CE, FCC, UL, cUL, RoHS / WEEE Compliant
Included Accessories:
Each HDMI TX ships with a desktop power supply (ENERGY STAR® qualified) with power cord
Optional Accessories:
AVB-VSTYLE-SURFACE-MNT, V Style Module Surface Mount (FG1010-722)
AVB-VSTYLE-RMK-1U, V Style Module Tray (FG1010-720)
AVB-VSTYLE-RMK-FILL-1U, V Style Module Tray w/fill Plates (FG1010-721)
AVB-VSTYLE-POLE-MNT, V Style Module Pole Mount (FG1010-723)
CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)
IR03, External IR Receiver Module (FG-IR03)
*Cable quality required in order to meet 100 meter distance should meet ANSI/TIA/EIA 568A-5 or better specification and be rated for 250 MHz or better. For cable runs approaching the 100m limit, Cat6/6e, Cat6a or Cat7 is recommended. It is recommended that the cabling between AMX systems/devices be a uniform run of solid core cabling with no patch cables or extensions. If a patch cable is required (for example, between a patch panel and an AMX device), the patch cable should be limited to 5 m total on each end. Best results have been seen using a Cat6 coupling device for attaching the cables together even when using lower rated Cat5e cabling. Important Notice: DXLink twisted pair cable runs for DXLink equipment should only be run within a common building
ENVIRONMENTAL
Temperature (Operating):32° to 104° F (0° to 40° C)
Temperature (Storage):-22° to 158° F (-30° to 70° C)
Humidity (Operating):5% to 85% RH (non-condensing)
Humidity (Storage):0% to 90% RH (non-condensing)
Power Dissipation (Max):
Local 12V supplied: 31 BTU/HR
DXLink power supplied via Enova DGX 16/32 Digital Media Switcher DXLink Twisted Pair Output Board or Enova DVX-2150HD or DVX-2155HD All-In-One Presentation Switcher: 31 BTU/HR
FRONT CONNECTORS
Advanced Configuration Interface:USB Mini-B Connector
BACK CONNECTORS
Local Power:2.1 mm DC Power Jack
HDMI Input:HDMI Type A Female
ICSLAN/Ethernet Port:RJ-45 Connector, TCP/IP Port (ICSLAN 10/100)
Serial:
3.5mm Pluggable Phoenix Terminal Block
Bidirectional RS-232
Standard NetLinx Baudrate 1200-115k
Parity support Odd/Even/None
IR Control:
Port for use with IR03 Receiver (Optional Accessory FG-IR03)
Port for use with CC-NIRC Emitter (Optional Accessory FG10-000-11)
USB (HID):USB Type B Connector
HDMI Output:HDMI Type A Female
Analog Stereo Input:3.5mm Mini-Stereo Jack
S/PDIF Digital Audio Input:RCA Jack
DXLink Output:RJ-45
CONTROLS & INDICATORS
Power Indicator:
Green indicates whether or not the module is powered on
Video Indicator:
Green LED indicates the presence of video and audio signals through the module
Audio Indicator:
Green LED indicates the presence of audio signals through the module
IR TX Indicator:
Red LED lights during the transmission of IR data via the rear IR port
IR RX Indicator:
Yellow LED lights during the receipt of IR data via the rear IR port
RS-232 TX Indicator:
Red LED shows serial transmit (TX) data activity
RS-232 RX Indicator:
Yellow LED shows serial receive (RX) data activity
LINK/ACT:
Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
Status:
Green LED lights when the Controller is programmed and communicating properly
CEC Indicator:
Yellow LED shows CEC data activity when in point-to-point mode
USB Indicator:Yellow LED shows USB (HID) activity
ID Pushbutton:Places system in NetLinx Device ID assignment mode
HDMI
Compatible Formats:HDMI, HDCP, DVI
Signal Type Support:
HDMI
DVI-D (Single Link with HDMI Cable Adapter)
DisplayPort ++ (Input Only, with HDMI Cable Adapter)
Input Signal Type:HDMI Type A Female
Output Signal Type:
DXLink to any of the following: DXLink HDMI RX Module, Enova DGX DXLink Twisted Pair Input Board, Enova DVX-3155HD or Enova DVX-2155HD All-In-One Presentation Switchers
Output Connector:RJ-45
Data Rate (Max):4.95 Gbps / 6.75 Gbps^
Pixel Clock (Max):165 MHz / 225 MHz^
Progressive Resolution Support:
480p up to 1920x1200 @ 60 Hz (including but not limited to those resolutions shown on Digital Video Resolution Support Appendix)
Interlaced Resolution Support:
480i, 576i, 1080i (including but not limited to those Resolutions shown on Digital Video Resolution Support Appendix)
Note-Reminder: Interlace video supported into the Transmitter, progressive only supported out of the Receiver unless in non-scaling bypass mode
Deep Color Support:24-bit, 30-bit^, 36-bit^
Color Space Support:
RGB 4:4:4
YCbCr 4:4:4 and 4:2:2
Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
3D Format Support:
Yes^ (HDMI Primary Formats)
Frame Packing 1080p up to 24Hz
Frame Packing 720p up to 50/60Hz
Frame Packing 1080i up to 50/60Hz
Top-Bottom 1080p up to 24Hz
Top-Bottom 720p up to 50/60Hz
Side-by-Side Half 1080p up to 50/60Hz
Side-by-Side Half 720p up to 50/60Hz
Audio Format Support:
Dolby TrueHD, Dolby Digital*, DTS-HD Master Audio DTS*, 2 CH through 8 CH L-PCM
Dolby Digital and DTS support up to 48kHz, 5.1 channels
Audio Resolution:16 bit to 24 bit
Audio Sample Rate:32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
Local Audio Support:Yes for audio insertion
HDCP Support:Yes
Supports AMX HDCP InstaGate Pro Technology
When used with an AMX Digital Media Switcher the key support is up to 16 sinks per output, independent of source device
When used as a single point to point solution the key support is defined by the source device
CEC Support:None
DDC/EDID Support:
EDID in point-to-point mode is passed up from the sink device. When used with an AMX Digital Media Switcher, the EDID is read from the switcher and presented to the source through the TX. The EDID is user re-programmable via the switcher See Enova DGX Twisted Pair DXLink Input Board data sheet for list
Input Voltage (Nominal):1.0 Vpp Differential
Input Re-clocking (CDR):Yes
Input Equalization:Yes, Adaptive
Propagation Delay (Typ):5 us
^Only supported when the DXLink HDMI Rx Scaler is in bypass mode and format is 1080p60 or less
AUDIO (ANALOG & DIGITAL S/PDIF)
Input Signal Types:
Stereo Analog, S/PDIF
Video signal must be present to pass Audio
Analog Input Level (Max):+2 dBu, unbalanced
Analog Input Impedance:10 kohms
Analog to Digital Conversion:48 kHz Sample Rate, 24-bit
S/PDIF Audio Format Support:Dolby Digital, DTS, 2 CH through 8 CH L-PCM
S/PDIF Resolution:16 to 24 bit
S/PDIF Sample Rate:32 kHz, 44.1 kHz, 48 kHz, 96 kHz
S/PDIF Input Signal Level Range:200 mVpp to 600mVpp terminated
S/PDIF Input Impedance:75 ohms
Analog to Digital Reference Level:+2.5 dBu = 0 dBfs
Input Connectors:
3.5mm Mini-Stereo Jack (Analog Stereo)
RCA Jack (S/PDIF)
