Octaire 矩阵切换器 Y/c BNC, Stereo 5T, DVC

OVERVIEW
Octaire Y/c Video + Stereo Matrix Switchers provide an extremely dense yet flexible solution for Y/c video and stereo configurations up to 64x64. All models include robust professional features including vertical internal switching functionality, standard redundant power supplies, digital audio input gain and output volume controls. All models also include integrated front panel control as well as TCP/IP and RS-232 control ports.

COMMON APPLICATION

Correctional facilities and athletic training facilities are just a few environments where the Octaire Y/c video and stereo audio switchers are an ideal solution for freely switching between a facilities numerous inputs and outputs.

FEATURES

◆  Ultra-flat video bandpass curve measured at a tight ±3 dB

◆  Service Access Spacing on BNC connectors

◆  Integrated vertical interval sync

◆  Digital volume control on each output

◆  Digital input gain control on each input to normalize audio input voltages

◆  Audio connections support balanced and unbalanced audio

◆  Audio breakaway to route audio-follow-video, video or audio alone

◆  Superior video crosstalk specifications ensure signal isolation and security

◆  Standard RS-232 control port

◆  Supports AutoPatch's simple BCS serial control protocol

◆  Standard Integrated TCP/IP APWeb control

◆  Includes intuitive front mounted control panel featuring LED backlit LCD and blue light buttons, allowing quick and easy access to execute many commands including status, change, disconnect, global presets, front panel lock and unlock, and more

◆  Front panel security lockout

◆  Ships with free APControl to provide easy single-user PC control of the matrix switcher

◆  Rack mounting ears included

◆  Backed by our AMX 3 year warranty

◆  Fully redundant power supplies with independent power paths for maximum reliability

◆  Global presets allow quick recall of a comprehensive snapshot of all switches and digital volume controls

◆  DAC (Detection Assignment and Control) eliminates the need for initial system setup; the Octaire automatically recognizes size and configuration parameters and is ready to accept switch commands as soon as it receives power

SPECIFICATIONS

I/O RANGE

◆  INPUTS: 32

◆  OUTPUTS: 48

NOTE: This system is made up of 2 standard video enclosure and 1 stereo audio enclosure. It occupies 12 RU. Specifications listed below are for individual enclosures.

GENERAL

◆  AC Power: 100-240 VAC single phase, 50-60 Hz

◆  Power Consumption (Max): 260 Watts

◆  Power Consumption (Typ): 120 Watts, fully loaded enclosure

◆  BTU/HR (Max): 887

◆  BTU/HR (Typ): 409, fully loaded enclosure

◆  Humidity: 0 to 90% non-condensing

◆  Operational Temperature: 32° to 113° F (0° to 45° C)

DIMENSIONS (HWD) WITH RACK EARS

◆  6 15/16" x 19" x 12"

◆  17.6 cm x 48.3 cm x 30.5 cm

◆  RU: 4

DIMENSIONS (HWD) WITHOUT RACK EARS

◆  6 15/16" x 17 3/8" x 12"

◆  17.6 cm x 44.2 cm x 30.5 cm

◆  RU: 4

WEIGHT

◆  Appx. 20 lbs (9.07 kg) per loaded enclosure

SHIPPING WEIGHT

◆  Appx. 24 lbs (10.89 kg) per loaded enclosure

MTBF

◆  66,000 hrs

CERTIFICATIONS

◆  CE, UL, cUL, RoHS / WEEE compliant

STANDARD VIDEO

◆  Input Level (Max): ±1.25 Volts

◆  Input Impedance: 75 Ohms

◆  Output Level (Max): ±1.25 Volts

◆  Output Impedance: 75 Ohms

◆  Frequency Response: 150 MHz or better (±3 dB)

◆  Crosstalk

    ○  <-80 dB (f = 1 MHz)

    ○  <-75 dB (f = 5 MHz)

    ○  <-64 dB (f = 10 MHz)

    ○  <-57 dB (f = 30 MHz)

    ○  <-53 dB (f = 100 MHz)

    ○  <-51 dB (f = 150 MHz)

◆  Differential Gain: <0.2% or better (f = 3.58 MHz)

◆  Differential Phase: <0.2° degrees or better (f = 3.58 MHz)

◆  Signal to Noise Ratio: >65 dB (Vin = 0.7 V, 100 IRE)

◆  Connectors: BNC

STEREO AUDIO WITH DVC

◆  Input Level (Max): +4 dBu, balanced

◆  Input Impedance: 18 kOhms

◆  Output Level (Max): +14 dBu, balanced (when +10dB of gain is set via serial)

◆  Output Impedance:

    ○  50 Ohms unbalanced

    ○  100 Ohms balanced

◆  Frequency Response: <±1 dB (20 Hz to 20 kHz)

◆  THD + Noise:

    ○  <0.03% (1 kHz, Vin = +2 dBu)

    ○  <0.05% (1 kHz, Vin = -10 to + 4 dBu)

◆  Signal to Noise Ratio: >84 dB (20 Hz to 20 kHz, Vin = +4 dBu)

◆  Crosstalk: <-100 dB (1 kHz, Vin = +14 dBu)

◆  Input Gain Adj. Range: ±10 dB, via serial/control panel. Total of input gain plus output cannot exceed +10 dB

◆  Output Volume Adj. Range: +10 dB to -70 dB (muted), via serial/control panel. Total of input gain plus output cannot exceed +10 dB

◆  Connectors: 5T