AMX 矩阵切换器 Modula CatPro

OVERVIEW
The Modula CatPro Series was designed to receive, route, and transmit uncompressed RGBHV + stereo over twisted pair cable without worrying about exact cable measurements or readjusting gain, peak, and skew when routing signal paths of various lengths. Once your system is set up, there is no need to readjust when switching between sources and devices that have different distance runs. Our intuitive CatPro Software Wizard allows for simple adjustment of gain, peak and skew on every Cat5 input received. This brings all signals back to a distance of zero -- ready to be sent to any destination device without the hassle of readjustment. Pair the Modula CatPro with the AutoPatch CatPro Transmitter/Receiver boxes for the ultimate flexibility when combining local and/ or long distance source devices with local and/or long distance destination devices.

For product assistance, configuration, or pricing please contact us at 800.622.0246, or e-mail: APGSales@amx.com.

COMMON APPLICATION
Perfect for a number of commercial applications including schools, universities, hospitals and presentation facilities that need to receive, route and transmit uncompressed RGBHV + stereo signals over twisted pair cable with distances of up to 1,000 feet.

FEATURES

◆  Integrated CatPro Technology to receive, route and transmit RGBHV and stereo over twisted pair cable

◆  Transmit high-resolution RGBHV / 1600x1200 (4:3) and 1920x1080p (16:9) @ 60 Hz up to 1000 feet over twisted pair cable

◆  CatPro Wizard provides a quick and easy software application for gain, peak and skew adjustments on each CatPro (RJ-45) RX board

◆  Intuitive gain, peak and skew adjustments at the touch of a button at each destination via CatPro RX

◆  2 Standard RS-232 control ports

◆  Backed by AMX Limited Lifetime Warranty

◆  Superior video crosstalk specifications ensure signal isolation and security

◆  Linkable enclosures to accommodate several signal types / enclosures under one control view

◆  Local presets allow quick recall of a pre-programmed set of switches with a single command

◆  Global presets allow quick recall of a comprehensive snapshot of all switches

SPECIFICATIONS

GENERAL

◆  AC Power: 100-240 VAC (50-60 Hz)

◆  Power Consumption (Max): 520 Watts

◆  Power Consumption (Typ): 255 Watts, fully loaded enclosure

◆  BTU/HR (Max): 1774

◆  BTU/HR (Typ): 870, fully loaded enclosure

◆  Operational Temperature: 32° to 110° F (0° to 43° C)

◆  Humidity: 0 to 90% non-condensing

DIMENSIONS (HWD) WITH RACK EARS

◆  7" x 19" x 17"

◆  17.8 cm x 48.3 cm x 43.2 cm

◆  RU: 4

DIMENSIONS (HWD) WITHOUT RACK EARS

◆  7" x 17 3/8" x 17"

◆  17.8 cm x 44.2 cm x 43.2 cm

◆  RU: 4

WEIGHT

◆  Appx 22-24 lbs (9.98-10.88 kg) per loaded enclosure

MTBF

◆  88,000 hours

CERTIFICATIONS

◆  CE, UL, cUL, RoHS / WEEE compliant

CATPRO RGBHV + STEREO (RJ-45)

◆  All Specs are defined for use in conjunction with a CatPro Transmitter and Receiver.

◆  Signal Types: RGBHV + Stereo Audio

◆  Maximum Resolution: 1600x1200* (4:3) and 1920x1080p (16:9) @ 60 Hz up to 1000 ft. Overall transmission distance including input and output cannot exceed 1000 ft from source to destination.

◆  RGB In Signal Level Range (Max): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Wizard)

◆  RGB Out Signal Level Range (Max): +0.75 V to -0.3 V typical (terminated, user adjustable with gain and peak using CatPro Receiver)

◆  RGB In Skew Adjustment: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Wizard)

◆  RGB Out Skew Adjustment: 0 to 62 ns, in 2 ns increments on RGB channels (user adjustable using CatPro Receiver)

◆  RGB In/Out Impedance: 75 Ohms

◆  RGB SNR: >50 dB

◆  RGB Crosstalk:

    ○  <-50 (f = 5 MHz)

    ○  <-35 (f = 30 MHz)

◆  Sync In Impedance: 510 Ohms

◆  Sync In/Out Polarity: Active High or Low (output follows input polarity)

◆  Sync Out Signal Levels: Low = 0 V, High = +5 V (unterminated)

◆  Audio In/Out Signal Type: Stereo, Unbalanced

◆  Audio In/Out Signal Level (Max): +8 dBu

◆  Audio In Impedance: 2 kOhms

◆  Audio Out Impedance: <5 Ohms

◆  Audio Frequency Response: <± 0.2 dB, 20 Hz to 20 kHz

◆  Audio THD+N: <0.04 %, 1 kHz, -10 dBu to +4 dBu

◆  Audio Crosstalk: <-98 dB (1 kHz, Vin = +4 dBu)

◆  Audio SNR: >83 dB, 20 Hz to 20 kHz Vin= +4dBu

◆  Audio Out Volume Adj. Range: +6 dB to Mute (user adjustable at CatPro Receiver)

◆  RGBHV + Stereo In/Out Connector: Female RJ-45

◆  Compatible Cable Types: Category Cable 5, 5e, 6, 6e, UTP, and STP**

* Signals displayed using 1600x1200 resolution at 60Hz may exhibit slightly visible background noise in certain circumstances (particularly with LCD monitors)

** All measurements were taken using Cat5e Cable

CATPRO RGBHV (HD-15)

◆  Input/Output Level (Max): +0.75 V to -0.3 V

◆  I/O Impedance: 75 Ohms

◆  Maximum Resolution: 1600x1200(4:3) and 1920x1080p(16:9) @ 60 Hz up to 1000 ft (Cat-5)

◆  Crosstalk:

    ○  <-50 (f = 5 MHz)

    ○  <-35 (f = 30 MHz)

    ○  <-30 (f = 150 MHz)

◆  Signal to Noise Ratio: >60 dB (Vin = 0.7 V, 100 IRE)

◆  Sync I/O Level: TTL

◆  Compatibility: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.

CATPRO STEREO AUDIO (PHOENIX-STYLE)

◆  Input Level (Max): +8 dBu, balanced

◆  Input Impedance: 18 kOhms

◆  Output Level (Max): +8 dBu, balanced

◆  Output Impedance: 50 Ohms

◆  Frequency Response: <±0.25 dB (20 Hz to 20 kHz)

◆  THD + Noise: <0.06 % (1 kHz, -10dBu to +4dBu)

◆  Crosstalk: <-95 dB (1 kHz, Vin = +4 dBu)

◆  Signal to Noise Ratio: >80 dB (20 Hz to 20 kHz, Vin=+4dBu)

◆  Input Gain Adj. Range: +6 dB to -6 dB, via potentiometer

◆  Output Volume Adj. Range: +10 dB to -70 dB (muted), via serial/control panel

◆  Connectors: 5T

◆  Compatibility: These boards can be used to break into and out of the CatPro RGBHV + Stereo boards.