Metreau 门禁对讲机 MET-ECOM

OVERVIEW
The Metreau Entry Communicator enables doorbell notification to residents of hotels, homes, or condos from visitors at doors and gates. With the addition of an AMX Modero intercom touch panel, residents can see visitors via an integrated one-way color camera, have two-way audio conversations, and open doors or gates. Adding the AMX Communication Gateway will also enable residents to communicate with visitors from any telephone throughout the business or residence.

COMMON APPLICATION
Ideal for placement in residential outdoor entryways or next to doors to notify residents that visitors have arrived.

FEATURES

◆  2-way VoIP audio to an intercom-enabled Modero Touch Panel

◆  1-way video conferencing with any Touch Panel

◆  Includes I/Os and Relays

◆  Dual-color LED button provides feedback and doorbell notification

◆  Small form factor and shallow depth make for easy installation

◆  VoIP integration allows an unlimited number of entry communicators to be accommodated per system

◆  Camera angle can be easily positioned during installation to allow viewing of guests at door or gate

◆  Power over Ethernet

◆  Weather-resistant

SPECIFICATIONS

DIMENSIONS (HWD)
5 3/8" x 3 5/8" x 1 9/16" (13.62 cm x 9.13 cm x 3.96 cm)

WEIGHT
14.4 oz (408 g)

POWER

◆  PoE powered – no local Power Supply needed

◆  IEEE 802.3af Compliant

FRONT PANEL COMPONENTS

◆  Integrated Color Video Camera

◆  Speaker

◆  Dual Color LED Status Bar: (Yellow/ Red) can be used to provide feedback, to attract attention for action, or as general indicator

◆  Pushbutton (Doorbell)

◆  Microphone

INTEGRATED COLOR VIDEO CAMERA

◆  QVGA 320 x 240

◆  Supports Motion JPEG (MJPEG) and H.263 codecs

◆  Viewing Angle: 42º

SPEAKER

◆  8 Ohm, 2W

◆  80dB SPL (sound pressure level at 1 meter)

◆  Meets G.711 sound standard

MICROPHONE

◆  -40 dB sensitivity, built-in echo cancellation (telephone quality)

◆  Full duplex communication

◆  VoIP Telephony

REAR PANEL COMPONENTS

◆  Camera Viewing Angle Adjustment

◆  Ethernet Port – 10/100 Ethernet with PoE. LEDs show communication activity, connection status, speeds, and mode information:
- SPD (speed) – Green LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps
- L/A (link/activity) – Orange LED lights On when the Ethernet cables are connected and terminated correctly and blinks when receiving Ethernet data packets

◆  2 Multi-Purpose I/Os (5V): 2-channel binary I/O ports for contact closure with each input being capable of voltage sensing. Input format is software select able with interactive power sensing for IR ports

◆  2 Low Voltage Relays (1A contact): 2-channel singlepole single throw relay ports with each relay being independently controlled and supporting up to 2 independent external relay devices

MOUNTING
The MET-ECOM is installed in one of two ways:

◆  4 screws for hard surface mounting

◆  2 expansion clips for pressure mounting

COLORS AVAILABLE

◆  Black MET-ECOM-BK (FG2180-01-BK)

◆  White MET-ECOM-WH (FG2180-01-WH)

◆  Antique Brass MET-ECOM-AB (FG2180-01-AB)

◆  Stainless Steel MET-ECOM-SS (FG2180-01-SS)

◆  Polished Brass MET-ECOM-PB (FG2180-01-PB)

◆  Brushed Pewter MET-ECOM-BP (FG2180-01-BP)

ENVIRONMENTAL

◆  Operating Temperature: 32º to 104º F (0º to 40º C)

◆  Heat Dissipation (Typical): 20.5 BTU/hr

INCLUDED ACCESSORIES
Installation Kit- includes front mount flange, 4 installation screws (#4-40 x 3.12), 2 Phoenix connectors (female, 3.5mm) and a Ferrite clip