
产品介绍
The Martin Audio W8LMD is a mini, wide-dispersion vertically arrayable enclosure. It can be used individually and in small quantities for short to medium throw applications (up to 30 metres) as well as a downfill element for the W8LM. Its 20° vertical dispersion requires fewer cabinets to cover the same area as a conventional line array element, yet it still benefits from the smooth, predictable coverage of a vertically coupled system.
FEATURES
Stand alone vertically arrayable enclosure
Line array downfill element
Consistent 120º (-6dB) horizontal mid and HF pattern control
20º (-6dB) vertical dispersion
Tripod mountable singularly or in pairs
Amplitude shading switch
Passive or Bi-Amp format
Compatible with WMX, WLX, WSXa, WS2A & WS218 subwoofers
TECHNICAL SPECIFICATIONS  | 
    |
TYPE  | 
    Three-way,active/passive,mili line array element  | 
  
FREQUENCY RESPONSE (5)  | 
    60Hz-18kHz ± 3dB  | 
  
DRIVERS  | 
    8"(200mm)/2"(50mm)voice coil,reflex-loaded direct radiator 8"(200mm)/2"(50mm)voice coil,neodymium driver,front horn loaded,rear reflex loaded 2 x 1"(25mm)exit HF compreesion drivers,horn loaded  | 
  
RATED POWER(2)  | 
    LF+MF:400W AES,1600W peak HF:75W AES,300W peak FR:400W AES,1600W peak  | 
  
RECOMMENDED AMPLIFIER  | 
    MA5.2K  | 
  
SENSITIVITY(6)  | 
    LF+MF:99dB HF:104dB FR:98dB rising to 103dB at HF  | 
  
MAXIMUM SPL(calculated @ 1m)  | 
    LF+MF:125dB continuous,131dB peak HF:123dB continuous,129dB peak FR:124dB continuous,130dB peak  | 
  
NOMINAL IMPEDANCE  | 
    LF+MF:12 ohms HF:12 ohms FR:12 ohms  | 
  
DISPERSION(-6dB)  | 
    120°horizontal(down to 750Hz) 20°vertical 140°horizontal(down to 650Hz)@-10dB  | 
  
CROSSOVER  | 
    300Hz passive,2.2kHz active or passive Shading control switch-rear mounted  | 
  
ENCLOSURE  | 
    Vertical trapezoid with 10°wall angle,multi-laminate birch ply construction  | 
  
FINISH  | 
    Textured black paint  | 
  
PROTECTIVE GRILLE  | 
    Black perforated steel  | 
  
CONNECTORS  | 
    2 x Neutrik NL4  | 
  
FITTINGS  | 
    Proprietary rigging system 2 x pocket handles each side 4 x M8 inters for extemally mounted top hat fitting  | 
  
DIMENSIONS (inc.wheelboard)  | 
    (W)620mm x (H)284mm x (D)400mm (W)24.4ins x (H)11.2ins x (D)15.8ins  | 
  
WEIGHT  | 
    30kg (66lbs)  |