DXlink™多格式多模光纤发射器,单工 DXF-TX-MMS

OVERVIEW
The DXLink Multi-Format Fiber Transmitter sends analog and digital audio and video signals including HDMI with HDCP up to 300 meters over multimode fiber. Use the DXLink Fiber Transmitter in conjunction with the Enova DGX 8, 16, 32 or 64 to transmit clear, uncompressed video at the fastest data rate in the industry – 10 Gbps.

COMMON APPLICATIONS
The ideal entry-point for any source designed into an Enova DGX integrated system that requires the distance capabilities and inherent security of fiber – or both; including campus-wide distribution of sources that are shared between classrooms, secure military applications, casinos, arenas and museums. Directly connect video sources such as PCs using the HD-15 multi-format input connection or HDMI input and easily include audio on the same fiber cable by using the stereo or digital audio connection.

FEATURES
• HDCP Compliance Over Fiber – Transmit HDCP compliant video including HDMI up to 300 m
• Industry Leading Data Rate – DXLink is leading the way with an optical transport rate of 10 Gbps
• Secure and Isolated – Fiber inherently provides extra security and electrical isolation making it the transport method of choice for many mission-critical secure environments
• InstaGate Pro® Technology – Easily integrate HDCP into system designs and enjoy hassle free matrix switching to all compliant displays, no tools, no delays and no key constraints – it just works
• Field Serviceable Fiber Modules – Easily remove and replace SFP modules in the field
• Multi-Format Analog Port and HDMI Port – Supports legacy analog signals – RGBHV, Component, S-Video, and Composite, and digital HDMI/HDCP, DisplayPort and DVI signals

*See Duplex models for bidirectional control over fiber. Simplex models do not support control transport over fiber (such as Ethernet, USB, IR, Serial Control or EDID); although when used as part of a complete Enova DGX solution, control can be provided if a supplemental independent network connection is used. See the "Instruction Manual – Enova DGX Digital Media Switchers" for details.

SPECIFICATIONS

DIMENSIONS (HWD)
1"×8 3/4" ×5 1/5" (2.54cm×22.12cm×13.08cm)

WEIGHT
• Approximately 1.1 lb (0.50 kg)
• Shipping Weight Approximately 2.2 lb (1 kg)

MTBF
124,232 hours

ACTIVE POWER REQUIREMENTS:
• AC Power:
• 100-240 VAC single phase, 50-60 Hz
• 0.8 A max. (100-240 VAC)
• Power Consumption (Max): 20 W
• Power Connector: 2.1 mm DC Power Jack

POWER SUPPLY
• External, Included:
• Each Multi-Format TX ships with a desktop power supply with power cord
• 2.5A at 12V, Max 13.5V

ENVIRONMENTAL
• Temperature (Operating): 32°F to 104°F (0°C to 40°C)
• Temperature (Storage): -22°F to 158°F (-30°C to 70°C)
• Humidity (Operating): 5% to 85% RH (non-condensing)
• Humidity (Storage): 0% to 90% RH (non-condensing)
• Heat Dissipation (On): 69 BTU/hr

ETHERNET
• Ethernet Connection: (1) RJ-45, TCP/IP Port (ICS LAN 10/100)
• Note: Simplex DXLink solutions do not support an Ethernet transport layer on the simplex fiber path, therefore an Ethernet connection is required to provide IR/RS-232/USB Keyboard/Mouse or NetLinx program control to this device

USB (HID) KEYBOARD & MOUSE
• USB (HID): (1) USB Mini A/B Connector ("HOST"); connect a DXLink Fiber TX to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver
• For a list of HID devices which have been tested and found to be working well with the latest firmware please visit: http://www.amx.com/products/AVB-RX-DXLINK-HDMI.asp and view the document “DXLink HID Keyboard and Mouse Supported Devices"
• See Duplex models for bidirectional control over fiber. Simplex models do not support control transport over Fiber (such as Ethernet, USB, IR, Serial Control or EDID); although when used as part of a complete Enova DGX solution, control can be provided if a supplemental independent network connection is used. See the "Instruction Manual – Enova DGX Digital Media Switchers" for details.

CONTROLS
• ICS LAN/Ethernet Port: (1) RJ-45, TCP/IP Port (ICS LAN 10/100), Note: Simplex DXLink solutions do not support an Ethernet transport layer on the simplex fiber path, therefore an Ethernet connection is required to provide IR/RS-232/USB Keyboard/Mouse or NetLinx program control to this device
• ID Pushbutton:
• Toggle between DHCP and static IP addressing
• Places system in NetLinx Device ID assignment mode
• Reset the factory default settings
• Restore the factory firmware image
• Advanced Configuration Interface: (1) USB Mini-B Connector ("PROGRAM"):
• Serial*
• (1) 3.5mm Pluggable Phoenix Terminal Block
• Bidirectional RS-232
• Standard NetLinx Baudrate 1200-115k
• Parity support Odd/Even/None
• IR RX*:
• (1) 3.5mm Mini-Stereo Jack
• Port for IR03 Receiver (Optional)
• IR TX*:
• (1) 3.5mm Pluggable Phoenix Terminal Block
• Port for IR01 Emitter (Optional)

*See Duplex models for bidirectional control over fiber. Simplex models do not support control transport over fiber (such as Ethernet, USB, IR, Serial Control or EDID); although when used as part of a complete Enova DGX solution, control can be provided if a supplemental independent network connection is used. See the "Instruction Manual – Enova DGX Digital Media Switchers" for details.

INDICATORS
• Power Indicator: (1) Green LED indicates whether or not the DXLF-MFTX-MM-D is powered on
• Digital Video Indicator: (1) Green LED indicates the presence of video signals through the module
• Audio Indicator: (1) Green LED indicates the presence of digital audio signals through the module
• Analog Video Indicator: (3) Green LEDs, 1 lights to indicate the presence of the type of analog video through the Multi-Format TX (composite, Y/c; Y/Pb/Pr or RGB; RGBHV or RGBS)
• IR TX Indicator: (1) Red LED lights during the transmission of IR data via the rear IR port
• IR RX Indicator: (1) Yellow LED lights during the receipt of IR data via the rear IR port
• RS-232 TX Indicator: (1) Red LED shows serial transmit (TX) data activity
• RS-232 RX Indicator: (1) Yellow LED shows serial receive (RX) data activity
• LINK/ACT: (1) Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
• Status: (1) Green LED lights when the Controller is programmed and communicating properly
• CEC Indicator: Not currently supported
• USB Indicator: (1) Yellow LED lights when host device is connected

DXLINK FIBER
• Fiber Connector:
• LC Duplex conforming to ANSI TIA/EIA 604-10 (FOCIS 10A)
• Note: On the DXLink Multimode Simplex Transmitter output, only the transmit portion of the SFP+ module is active
• Fiber Cable Type: 50/125μm
• Fiber Cable Length: 300 m (984 ft)
• Transport Layer Throughput: 10.3125 Gbps
• Fiber Transceiver Type: 10G SFP+
• Optical Wavelength: 850 nm
• Multimode Optical Budget:
• 6.8 dB (typ) between DXLink Fiber Transceivers
• Optical Modulation Amplitude (OMA): -4.3 dBm (min)
• Optical Modulation Amplitude (OMA) Sensitivity: -11.1 dBm (typ)
• Multimode Optical Transceiver Mean Output Power: -1 dBm (avg pwr)

HDMI
• Input Connector: (1) HDMI Type A Female
• Compatible Formats: HDMI, HDCP , DVI
• Signal Type Support:
• HDMI
• DVI-D (single link with HDMI cable adapter)
• DisplayPort ++ (Input Only, with HDMI or DVI cable adapter)
• Local Loopback Output Connector: (1) HDMI Type A Female Local Loopback Output, +5 V DDC Pin Output: 55 mA, non-scaling (Single Link With Cable Adapter)
• Local Loopback Output +5V DDC Pin Output: 55 mA
• Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz (including but not limited to those resolutions shown in the "Instruction Manual - DXLink Fiber Transmitters and Receivers")
• Interlaced Resolution Support:
• 480i, 576i, 1080i (including but not limited to those resolutions shown in the "Instruction Manual – DXLink Fiber Transmitters and Receivers"
• System design note: If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through unaltered to DXLink Twisted Pair and Fiber Receivers; if in scaler Bypass mode local DVI and HDMI output boards will still deinterlace video to a progressive resolution format.
• 2K Resolution Support:
• 2048x1024 @ 47Hz, 2048x1080 @ 60Hz, 2048x1152 @ 60Hz, 2048x1536 @ 24Hz
• Note: 2K formats are only compatible with the DVI, HDMI and DXLink Fiber Input/Output boards and require the output or RX Scaler to be set in Bypass mode
• 3D Format Support:
• Yes, if Scaler on corresponding output board or DXLink Fiber RX is set to Bypass mode
• Frame Packing 1080p 24Hz
• Frame Packing 720p 50/60Hz
• Frame Packing 1080i 50/60Hz
• Top-Bottom 1080p 24Hz
• Top-Bottom 720p 50/60Hz
• Side-by-Side Half 1080i 50/60Hz
• Deep Color Support:
• 24-bit, 30-bit
• 30-bit supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
• Color Space Support:
• RGB 4:4:4
• YCbCr 4:4:4 and 4:2:2
• Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
• HDCP Support:
• Yes
• Supports AMX HDCP InstaGate Pro Technology
• DXLink fiber products have HDCP key support for up to 16 sinks per output, independent of source device
• CEC Support: None
• DDC/EDID Support:
• The HDMI EDID is user re-programmable with DGX Configuration Software via the USB Program port onthe Transmitter
• For the specific EDID list, see the specifications in the "Enova DGX DXLink Fiber Boards" chapter in the Instruction Manual - Enova DGX 8/16/32/64 Digital Media Switchers
• Propagation Delay (Typical): 4.8 us
• Input Voltage (Nominal): 1.0 Vpp Differential
• Input Re-clocking (CDR): Yes
• Input Equalization: Yes, Adaptive
• Video Data Rate (Max):
• 4.95Gbps / 5.568Gbps
• 5.568 Gbps supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
• Video Pixel Clock (Max):
• 185.625 MHz
• 185.625 MHz supported when the HDMI Output Board scaler or DXLink RX scaler is in Bypass mode using CEA-861 formats and resolution is 1080p60 or less
• Audio Format Support:
• Dolby TrueHD, Dolby Digital, DTS-HD Master Audio, DTS, 2 CH through 8 CH L-PCM
• Dolby Digital and DTS support up to 48kHz, 5.1 channels
• Audio Resolution: 16 bit to 24 bit
• Audio Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
• Local Audio Support: Insertion

ANALOG VIDEO
• Input Connector: (1) HD-15, breakout cable required for RGB formats
• Compatible Formats: RGBHV, RGBs, RGsB, YPbPr (HDTV), Y/c (S-Video), C (Composite)
• Progressive Resolution Support: 480p up to 1920x1200 @ 60 Hz including but not limited to those resolutions shown in the "Instruction Manual - DXLink Fiber Transmitters and Receivers"
• Interlaced Resolution Support:
• 480i, 576i, 1080i including but not limited to those resolutions shown in the "Instruction Manual - DXLink Fiber Transmitters and Receivers"
• System design note: If input is interlaced, all scaled outputs will deinterlace video to a progressive resolution format. If in scaler Bypass mode interlaced input will pass through unaltered to DXLink Twisted Pair and Fiber Receivers; if in scaler Bypass mode local DVI and HDMI output boards will still deinterlace video to a progressive resolution format.
• Auto-Adjust Input: Supported
• RGB Input Signal Level Range: 1 Vpp nominal
• RGB Input Impedance: 75 Ω
• HV Sync Input Signal Level Range: 2 to 5Vpp
• HV Sync Input Impedance: 2.5pF Typ, 10pF Max
• Digital Processing: 24bit, 165MHz
• Y/Pb/Pr Input Signal Level Range: 1.0 Vpp for Y, 700mVpp for Pb Pr
• Y/Pb/Pr Input Impedance: 75Ω
• Y/c (S-Video) Input Signal Level Range: 1Vpp for Y, 1Vpp for c
• Y/c (S-Video) Input Impedance: 75Ω
• C (Composite) Input Signal Level Range: 1.0 Vpp
• C (Composite) Input Impedance: 75Ω

S/PDIF DIGITAL AUDIO
• Input Connector: (1) RCA Jack, video signal must be present to pass audio
• Input Signal Types: S/PDIF, video signal must be present to pass audio
• S/PDIF Audio Format Support
• Dolby Digital, DTS, 2 CH L-PCM
• Dolby Digital and DTS support up to 48kHz, 5.1 channels
• S/PDIF Resolution: 16 to 24 bit
• S/PDIF Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 96 kHz
• S/PDIF Input Signal Level Range: 200 mVpp to 600 mVpp terminated
• S/PDIF Input Impedance: 75 Ω
• Analog to Digital Reference Level: +2.5 dBu = 0 dBfs

ANALOG AUDIO
• Input Connector: (1) 3.5mm mini-stereo jack, video must be present to pass audio
• Input Signal Types: Stereo analog, video must be present to pass audio
• Analog Input Level (Max): +2.5 dBu, unbalanced
• Analog Input Impedance: 10k Ω
• Analog to Digital Conversion: 48 kHz Sample Rate, 24-bit
• Analog to Digital Reference Level: +2.5 dBu = 0 dBfs

FRONT CONNECTORS
• Advanced Configuration Interface: (1) USB Mini-B Connector ("PROGRAM")
• Local Loopback Output Connector: (1) HDMI Type A Female, non-scaling ("LOCAL OUT")

BACK CONNECTORS
• Video Input: (1) HD-15 (RGBHV, RGBs, RGsB, Y/Pb/Pr, Y/c / S-Video, composite (breakout cable is required for RGB formats)
• HDMI Input: (1) HDMI Type A Female
• Analog Stereo Input: (1) 3.5mm Mini-Stereo Jack
• S/PDIF Digital Audio Input: (1) RCA Jack
• ICS LAN/Ethernet Port: (1) RJ-45 Connector, TCP/IP Port (ICS LAN 10/100)
• Serial: (1)
• 3.5mm Pluggable Phoenix Terminal Block
• Bidirectional RS-232
• Standard NetLinx Baudrate 1200-115k
• Parity support Odd/Even/None
• IR RX:
• (1) 3.5mm Mini-Stereo Jack
• Port for IR03 Receiver (Optional)
• IR TX:
• (1) 3.5mm Pluggable Phoenix Terminal Block
• Port for IR01 Emitter (Optional)
• USB (HID) Keyboard & Mouse: (1) USB Mini A/B Connector ("HOST"); connect a DXLink Fiber TX to a PC and emulate keyboard and mouse commands from a DXLink Fiber Receiver
• DXLink Fiber Output: (1) LC Duplex conforming to ANSI TIA/EAI 604-10 (FOCIS 10A)
• Local Power: 2.1 mm DC Power Jack

GENERAL
• Noise Level: @ dBA @ 1m (typ), 45.3 dBA @ 1m (max)
• Airflow: Convection (openings on top of case), forced air (out of front plate, when fan is active)
• Mounting Options: Compatible V Style mounting options:
• AVB-VSTYLE-RMK-FILL-1U, V Style Module Rack Mounting Tray with Fill Plates (FG1010-721)
• AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting Tray (FG1010-720)
• AVB-VSTYLE-SURFACE-MNT, V Style Single Module Surface Mount Brackets (FG1010-722)
• AVB-VSTYLE-POLE-MNT, V Style Single Module Pole Mounting Kit (FG1010-723)

Regulatory Compliance:
• UL 60950-1
• CSA 60950-1
• IEC 60950‐1
• CE EN 60950-1
• CE EN 55022 Class A
• CE EN 55024
• FCC CFR Title 47 Part 15 Subpart B Class A
• ICES-003 Class A
• RoHS / WEEE Compliant

SAFETY CERTIFICATION
Class 1 Eye safe per requirements of IEC 60825-1 / CDRH

INCLUDED ACCESSORIES
Ships with a desktop power supply with power cord

OPTIONAL ACCESSORIES
• AVB-VSTYLE-RMK-FILL-1U, V Style Module Rack Mounting Tray with Fill Plates (FG1010-721)
• AVB-VSTYLE-RMK-1U, V Style Module Rack Mounting Tray (FG1010-720)
• AVB-VSTYLE-SURFACE-MNT, V Style Single Module Surface Mount Brackets (FG1010-722)
• AVB-VSTYLE-POLE-MNT, V Style Single Module Pole Mounting Kit (FG1010-723)
• CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)
• IR03, External IR Receiver Module (FG-IR03)
• CC-USB, USB Programming Cable (FG10-5965)

COMPATIBLE AMX PRODUCTS
• Enova DGX 8/16/32/64 Digital Media Switchers with Multimode Fiber Input Board installed including DGX-I-DXF-MMS (FG1058-623) and DGX-I-DXF-MMD (FG1058-622)
• Direct point-to-point connection with a Multimode Fiber Receiver including DXF-RX-MMS (FG1010-563) or DXF-RX-MMD (FG1010-562)

Note: Connectivity between DXLink Fiber Transmitters and DXLink Fiber Input Boards / DXLink Fiber Output Boards and DXLink Fiber Receivers products requires matching model types, Multimode to Mutimode and Single Mode to Single Mode. A variety of boards can be used within a common enclosure.

See Duplex models for bidirectional control over fiber. Simplex models do not support control transport over fiber (such as Ethernet, USB, IR, Serial Control or EDID); although when used as part of a complete Enova DGX solution, control can be provided if a supplemental independent network connection is used. See the "Instruction Manual – Enova DGX Digital Media Switchers" for details.