QQ在线
产品介绍
OVERVIEW
The UDM-1604C Multi-format Distribution Hub delivers any video source, including Composite, Component, S-Video, and RGBHV to up to 64 display devices. It supports 4 high resolution input ports and 16 UDM output ports.
COMMON APPLICATION
Ideal for commercial applications such as retail or digital signage applications that require delivery of up to 4 video sources to up to 16 displays.
FEATURES
◆ 4 multi-format inputs (plus 4 CVBS inputs) x 16 outputs
◆ Supports Composite, S-Video, Component, RGBHV
◆ Transmit signals up to 1000 feet (300m) over a single twisted pair cable
◆ Digital audio support
◆ Central device control
◆ Compatible with TVM-1600
SPECIFICATIONS
DIMENSIONS (HWD)
◆ 1 3/4" x 19" x 12 1/2" (4.5 cm x 44 cm x 32 cm)
◆ RU: 1
WEIGHT
8.8 lbs (4 kg)
POWER
90-264v AC140 W (3 PIN IEC)
FRONT PANEL COMPONENTS
◆ IR Sensor: Infrared receiver port (IRRX) for learning IR remote control functions from IR controlled devices
◆ Outputs: 16 RJ-45 ports for connection with compatible UDM-RX02 Receivers
◆ A/V Inputs: 4 RJ-45 ports for connection from Endeleo TVM hubs (via Cat5, Cat5e or Cat6)
REAR PANEL COMPONENTS
◆ Network Port: RJ-12 10baseT network port provides network connectivity
◆ Serial Port: RJ-12 port allows an administrator to control various functions from a command line prompt
◆ IRTX Ports: 2 Infrared Transmit (IRTX) ports allow the UDM Hub to control IR devices via IR emitters attached to the UDM. The IR cable is attached to the IR panel of the controlled device to receive IR commands issued through the software or remote control.
◆ Input Connectors (A-D): 4 sets of Input connections for up to 4 A/V inputs with the following connectors:
- Video
- Audio Left
- Audio Right
- S/PDIF
◆ Cascade IN/OUT Ports: These ports allow UDM Hubs to be cascaded together
◆ Cascade In Port (from another UDM Hub)
◆ Cascade Out Port (to another UDM Hub)
◆ IEC Power Connector: Universal switch-mode power supply
- As a Class 1 appliance the Hub should be connected to a mains supply with a protective earthing connection
- The Power On/Off switch is located beside the IEC power connector
Note: The rating label found to the bottom left of the hub, beneath the IEC connector, contains important information applicable to the Hub's installation environment.
NETWORK INTERFACE
10baseT
SERIAL INTERFACE
9600,8,N,1
MAX VIDEO INPUT
◆ 4 x RGBHV (or)
◆ 4 x S-Video (or)
◆ 12 x Composite (plus)
◆ 4 x Endeleo TVM-1600 or CVBS
CASCADE PORT
Matrix connector for tertiary units
ELECTRICAL
RJ-45 indicating power to receiver and link status
CERTIFICATIONSCE,UL,FCC part 15 Class A
ENVIRONMENTAL
◆ 35ºF to 95ºF (5ºC to 35ºC)
◆ Max. relative humidity - 85% (non-condensing)
INCLUDED ACCESSORIES
◆ IEC power cord
◆ 19" mounting brackets
◆ RS-232 DB-9/RJ-12 connection cable (FG-RS01)
◆ 6' Ethernet Crossover Cable
◆ IR03 External Infrared Receiver Module (FG-IR03)
◆ UDM-RC10 IR Engineering Remote Control (FG-UDM-RC10)
◆ NOTE: No A/V interface cables supplied
